- Carpet and Fabric Cleaner
Nu-Karpet Kare™
- VOC-free
- Readily biodegradable
This is a biotechnological cleaner designed for carpet cleaning and stain removal from fabrics. It can be used for removing both water-based and oil-based stains, as well as for shampoo cleaning, bonnet cleaning, and pre-treatment.
Thanks to its low-foaming formula, dirty water recovery and drainage are easier, helping to improve work efficiency.
- Application
-
Carpet Cleaning
- Packaging (Product code)
- 900mL x 6 bottles（730510）
4L x 2 bottles（730520）
- JAN code
- 900mL x 6 bottles：4986167000748（Single Unit）／ 4986167000755（Case）
4L x 2 bottles：4986167000762（Single Unit）／ 4986167000779（Case）
- Standard Dilution Ratio
- 10 to 100 times
- pH
- Neutral
- Environmental Performance
- Ecologo
- Main Applications & Features
- Cleaner for Carpets, Sofas, Car Seats, Curtains, and Other Fabrics
- Usage Instructions
- ・Spot Stain Removal:
If the stain is fresh and still wet, blot up any excess with a clean, dry cloth. Dilute Nu-Karpet Kare™ at a ratio of 1:10 (100 ml of cleaner per 1 liter of water) in a spray bottle. Generously spray the stained area and the surrounding fabric. Using a soft-bristle brush or a clean cloth, gently brush in circular motions from the outside of the stain toward the center. Wipe off any excess cleaning solution with a clean, dry cloth. If necessary, rinse with clean water and remove any remaining moisture.
・Carpet Cleaning with Extractor Machine:
– Pre-treatment:
Dilute the product at 1:100 (10 ml per 1 liter of water) in a spray bottle or sprayer. Generously spray over stains or high-traffic areas and let sit for a few minutes.
– Cleaning with Extractor:
Dilute the product at 1:50 (20 ml per 1 liter of water) in the clean water tank of the extractor. You may clean in sections, but be sure to overlap each section slightly to avoid streaks or missed areas.
Note: For heavily soiled high-traffic areas, shampoo cleaning is recommended.
・Entrance Cleaning – Spray & Vac™ Method:
The Spray & Vac™ Method is ideal for routine maintenance of entrances and high-traffic areas.
First, vacuum the carpet thoroughly. Then, dilute the product at 1:100 (10 ml per 1 liter of water) in a sprayer. Lightly spray the area to be cleaned, making sure not to soak the fabric, and spray slightly beyond the stained or dirty area. Allow it to sit without rinsing, then vacuum once dry. Repeat as needed.
Replacing daily vacuuming with the Spray & Vac™ Method can improve cleaning efficiency.